A system of massive fences for an industrial enterprise, corporation or private house is not only a choice of a design with high technical parameters. Proper assembly is also important, which involves a series of earthworks. They should be outsourced to professional companies that work on the basis of site visits, design and architectural documentation. This makes it possible to create a viable fence capable of withstanding high static loads.

Why is the technical document important?

Many companies that provide fencing installation services do not base their work on design activities. However, it should be emphasized that this is a very important stage, which significantly affects the final quality of the entire fence system. The design allows you to avoid assembly problems, errors, or even set a work schedule to avoid adverse weather conditions, especially rain. Therefore, before installing fencing grids, gates and gates, as well as system and brick fences, technical studies should always be prepared.

Excavation work during the creation of the fence

Depending on the type of fence chosen by the investor, it is necessary to perform more or less complex earthworks. They often involve levelling the land along with waste disposal and may even involve replacing the land! Also important is the work related to the excavation of the foundation for larger fences, including brick ones, or the preparation of a system foundation or a foundation traditionally made using concrete. Important earthworks also include preparing the roadway to the gate, as well as places for sidewalks leading to the gate. When hiring professionals, the contractor never forgets about important measurements at this stage of investment - in the case of installing a panel system, we are talking about starting and corner supports that cannot be moved in the future.

Installation of a fence, for example, using a panel system

The fence assembly itself, as you can see, accounts for 1/3 of the success of all work. In the case of a panel system, the racks should be installed at certain, precisely defined distances, which in the next step will allow the welded panels to be attached to them. It is important to use clamp fastening systems, which come in initial, intermediate and angular types. It is worth knowing that the panel system can be installed both on a concrete base, that is, on screw-on pillars, as well as with spot concreting of pillars. Проститутки и секс в Симферополе, спать со шлюхами за деньги.